Firmware Huawei E5372s
I have a E5372s wireless modem that I purchased (new) 6 months ago in Indonesia. It is the Bolt 4g model. It came unlocked and I have been using it in Australia for 5 months without a problem. Yesterday it showed an update available on the LCD screen, so I pressed the power button (as instructed) and the modem started downloading the update. After the update installed the Modem is now showing 'Device Locked' on the LCD screen.
I tried another SIM card, but this ddn't change the status. So I proceeded to the DC-Unlocker website (thinking that the modem had installed new software and was now locked to the Bolt network in Indonesia, and so needed unlocking?).
I installed DC-Unlocker program and purchased 7 credits (what was suggested on the purchase page). Then ran the DC-Unlocker with the Modem plugged into my WIN7 Laptop via a USB lead that came with the Modem. DC-Unlocker says cannot detect modem, run as Administrator, so I closed the DC-Unlocker and opened again via right click 'run-as-administrator', but still the Modem is not detected? Where do I go from here?
Kekurangan Modem Bolt Huawei E5372s kebanyakan terletak di device nya yang sering mendadak LOCKED akibat mengupdate software ke versi 21.270., Nah pada kesempatan kali ini Koneksia.com akan membeberkan tutorial panduan cara untuk memecahkan masalah modem Bolt E5372S yang muncul “DEVICE LOCKED”, cara yang koneksia.com bagikan ini.
Thnaks for your reply, but I am not clear with your questions: 1) How do I make sure all drivers are installed? 2) How do I make sure modem connection software is installed, but not running? 3) The modem won't connect to the internet. That is why I am asking how to fix it! 4) But I am now using an ICLICK dongle to connect to the internet. Is that a same manufacturer device?Go to device manager and check if your E5372 is visible under one or several of these lines: modems/ports/network adapters/cdrom/drives.
Well if you had launched any setup from device's drive then it is most likely installed. Make sure USB cable that you connect device with is in good shape and not damaged. I haven't tried to launch any set up from the devices drive?
All I have done is connect as I always have done, but now the Bolt screen shows 'This device is network locked, please insert correct USIM' In Control Panel-Device Manager, the only two items visible when the E5372 is plugged in via the USB lead is under: Disc Drives = 'Huawei TF Card Storage Device' and under: DVD/CD-ROM Drives = 'Huawei mass Storage USB Device' Nothing under: Modems, Ports or Network Adaptors? I have read the instructions from a previous post on this forum: to download Huawei_E5372_Firmware_21.270._Bolt_Indon esia.dgtk (which I have done), but then I don't understand what to do with this? It says to 'Flash' the modem, but no instructions found on how to 'Flash'?? I haven't tried to launch any set up from the devices drive? All I have done is connect as I always have done, but now the Bolt screen shows 'This device is network locked, please insert correct USIM' In Control Panel-Device Manager, the only two items visible when the E5372 is plugged in via the USB lead is under: Disc Drives = 'Huawei TF Card Storage Device' and under: DVD/CD-ROM Drives = 'Huawei mass Storage USB Device' Nothing under: Modems, Ports or Network Adaptors?
I have read the instructions from a previous post on this forum: to download Huawei_E5372_Firmware_21.270._Bolt_Indon esia.dgtk (which I have done), but then I don't understand what to do with this? It says to 'Flash' the modem, but no instructions found on how to 'Flash'??Means you haven't installed it yet on pc therefore it is not detectable, please check your computer area, and open drive of your device to launch setup of installation. First make sure device is detectable otherwise flashing or something else won't help. These are the steps to unlock it: Download lower bolt firmware from here: (second file from bottom). Then flash device using this software: after downgrade is complete, use standard bolt unlocker tool to unlock. Ok, thanks Valdemaras, great I have now set up the installation. Now DC-Unlocker is recognising the Modem, but is reporting the following: Model - Huawei E5372 / MegaFon MR100-3 Interface: 192.168.1.1 Found modem: E5372 Model: Huawei E5372 / MegaFon MR100-3 IMEI: 55605 Serial NR.: P4UFGA Firmware: 21.270.
Hardware ver.: CL1E5372SM06 Web UI version: 15.100. SIM Lock status: Locked (Card lock) Wrong codes entered: 10 (unlock attempts left: 0) Device is supported for unlock only with special software. Abbyy finereader full crack.
Download it from DC-unlocker support area (). I went to the suggested link and downloaded Huawei _E5372Bolt_Unlocker_v4.exe but when I load this I get the following error report: This file is only for E5372 devices with 21.270. Version (my modem now has version 21.270.11.
04.1151 installed. Any advice where to go from here? I just re-read your prior post Valdemaras, then realised HOW to 'Flash' using the downloaded sofware. It was successful, thank you very much for your help. My tip to anyone with this modem is NOT to press the Power button when the LCD shows an update available.
It has caused me no-end of headaches to try to fix today. As soon as I unlocked it, again it wanted me to instal an update again. This time I pressed the MENU button to cancel the update:-)Great news then Thank you for letting us know it. We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners.
For additional details, refer to our. By clicking ' I AGREE' below, you agree to our and our personal data processing and cookie practices as described therein.
You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Huawei E5372s Firmware Driver - This Printer is perfect for those of you who have a very busy workload, with you and have Huawei E5372s Firmware Driver Download, your performance will be very easy and fast when doing photo printing or copy writing. Now it's time for you to have Huawei E5372s Firmware, because this printer will greatly save your time with a very affordable price will certainly product a very high quality work, until you will be greatly facilitated when working with Huawei E5372s Firmware, please visit Shop nearby to own this printer.
We provide driver download if your printer need storage device from driver we give please install download link below for driver Huawei E5372s Firmware, hope we can help you, best wishes for you and thank you for visiting Driver Download. How to install Huawei E5372s Firmware Driver your Computer: • Click on the link download that we provide in this article • When the Huawei E5372s Firmware driver download is full and you prepare to set up the files, click “Open Folder” or “Open File”, and after that click the downloaded file. The file name ends in.exe. • You can accept the default area to conserve the files. Click Next, then wait while the installer removes the files to get ready for setup. • If you closed the Download Complete screen, search to the folder where you conserved the.exe file, then click it. • When the Install Wizard begins, follow the on-screen directions to set up the software application.
How To Remove Huawei E5372s Firmware Driver from your Computer: • Open Control Panel to uninstall your Huawei E5372s Firmware Driver then click Unistall a Program. • Doubleclick on the printer you wish to unistall, then click yes • When the uninstall wizard end, click surface. Download Driver for Huawei E5372s Firmware: Support Operating System: Windows 8.1 (32-bit), Windows 8.1 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 7 (32-bit), Windows 7 (64-bit), Windows Vista (32-bit), Windows Vista (64-bit), Windows XP (32-bit), Windows XP (64-bit), Windows 2000, Mac OS X (10.10), OS X (10.9), OS X (10.8), Mac OS X (10.7), Mac OS X (10.6) Hardware: Huawei E5372s Firmware Software: Firmware Driver File Language: Multi-Language.
Huawei E5372s Firmware Printer Driver.
Download Huawei Flasher
I had already written about unlocking of ),,. Previously, I have successfully of Orange brand. Today, I am sharing with you all types of firmware, which might be helpful for you. Huawei E5372 LTE Cat4 Mobile WiFi Hotspot 21.9 MiB 19.6 MiB 19.5 MiB 19.6 MiB 19.6 MiB 35.6 MiB 35.6 MiB 57.6 MiB 35.5 MiB 57.1 MiB 35.7 MiB 111.9 MiB 89.7 MiB 19.5 MiB Unlocking for has been already described. I also want to mention here that unlocking charge for Huawei E5372 and Huawei E5170 WiFi Router is 6 USD. Other than E5372 and E5170 routers unlock code, you can get in only 2.38 USD, which you can.
Downgrade Firmware Huawei E5372s
From now, all firmware and software update which is related to Huawei E5372 WiFi MiFi router will be updated in this article. Keep visiting, I will upload more and more Huawei and ZTE firmware very soon. Update: (English / Arabian / Password: Huawei) (Thanks to Fakiro) (English and German).